Annual water tests are recommended for private wells, especially for shallow wells, and whenever a problem is suspected. Owners of private wells can have their water tested by collecting a sample themselves or by hiring a qualified person to do so. Sampling and handling procedures depend on the water quality concern and should be followed carefully. If you have any questions please call our office before you place you order.
Included in your analysis:
Electrical Conductivity (EC)
Total Soluble Salts (TSS) in ppm
Tons/Acre Foot of Dissolved Solids
pH
Chlorides (Cl)
Carbonates (CO3)
Bicarbonates (HCO3)
Calcium (Ca)
Sodium (Na)
Potassium (K)
Magnesium (Mg)
Sulfates (SO4)
Nitrates (NO3)
Iron (Fe)
Copper (Cu)
Sodium Absorption Ratio (SAR)
Result Interpretations
Result Recommendations
Water should be tested after any repairs or modifications to the water supply system and for new wells.
Normally, hard water does not interfere with livestock performance; however, hard waters can cause difficulty in washing of milking equipment and causes water heaters to "lime up." Contaminates such as iron and sand will clog pipelines. Well water with high iron content may have problems with iron bacteria forming a red, slimy mass that can clog well screens and require periodic treatment with chlorine. Sulfur waters are corrosive and have a bad odor.
Minimum Sample Size Required: 16 ounces
Turnaround Time: 4-5 business days
Save this product for later
Frequently Asked Questions
Hi there! Have some questions about our company? Find the answers below.
What are your business hours?
Our office is open Monday thru Friday from 8 am to 5 pm. We do close for major holidays, so we recommend ordering your testing and sending your sample early if a holiday is coming up. You can always reach us by email. Just send us a message at info@tpslab.com
When will I get my results?
We understand that you need your results as soon as possible. That is why we make sure to begin processing your samples as soon as they arrive at our laboratory. When the results are ready, we will email them to the email address you provided on your submittal form. The list below will give you an idea of our usual turnaround times.
Soil Tests: 5-7 Business days
Water Tests: 5 - 7 Business days
Plants Tests: 24 - 48 Hours
Compost Tests: 7 - 14 Business days
Fertilizer Tests: 3 - 5 Business days
Heavy Metals Test: 7 - 14 Business days
We offer a rush option for an additional 50% of the testing cost, but we would encourage you to give yourself time to test before you get to a point where a rush is needed.
