Regardless of your water source, here are two situations that may require testing:
Do you suspect excess minerals may be in your water source?
Most water municipalities test for iron, boron and other elements as a regular part of water monitoring. These tests give a system-wide picture, but do not reflect conditions at a specific household faucet. If you want to know if your home’s drinking water contains unsafe levels of these elements, have your water tested.
Testing is the only way to confirm if these elements is present or absent. Some faucet and pitcher filters can remove minerals from drinking water. If you use a filter to remove minerals, be sure you get one that is certified by NSF International. For more information, visit www.epa.gov/ground-water-and-drinking-water.
Are you considering a home water treatment unit?
Find out what is in your water and what you might want to remove before contacting potential dealers. Be informed so you can make the right decisions.
To help you, please visit: www.epa.gov/safewater.
Included in your analysis:
Electrical Conductivity (EC) | Total Soluble Salts (TSS) in ppm | Tons/Acre Foot of Dissolved Solids |
pH | Chlorides (Cl) | Carbonates (CO3) |
Bicarbonates (HCO3) | Calcium (Ca) | Sodium (Na) |
Potassium (K) |
Magnesium (Mg) |
Boron (B) |
Iron (Fe) | Manganese (Mn) | Copper (Cu) |
Zinc (Zn) |
Sulfates (SO4) |
Nitrates (NO3) |
Sodium Absorption Ratio (SAR) | Result Interpretations |
Result Recommendations |
Minimum Sample Size Required: 16 ounces
Turnaround Time: 4-5 business days
Our office is open Monday thru Friday from 8 am to 5 pm. We do close for major holidays, so we recommend ordering your testing and sending your sample early if a holiday is coming up. You can always reach us by email. Just send us a message at info@tpslab.com
We understand that you need your results as soon as possible. That is why we make sure to begin processing your samples as soon as they arrive at our laboratory. When the results are ready, we will email them to the email address you provided on your submittal form. The list below will give you an idea of our usual turnaround times.
Soil Tests: 5-7 Business days
Water Tests: 5 - 7 Business days
Plants Tests: 24 - 48 Hours
Compost Tests: 7 - 14 Business days
Fertilizer Tests: 3 - 5 Business days
Heavy Metals Test: 7 - 14 Business days
We offer a rush option for an additional 50% of the testing cost, but we would encourage you to give yourself time to test before you get to a point where a rush is needed.
Thank you for joining our mailing list. You will now begin to receive event announcements, newsletters and all of our latest updates.
For general inquiries and questions, contact us via email.
All Rights Reserved | TPSL