Soybeans - Plant Nutrition & Sampling

Joe Pedroza • October 1, 2020

Soybeans: a high profit potential


Soybeans have a high profit potential. Since approximately 90% of production costs for soybeans are incurred at the 30 bushel yield level, growers should be able to economically fertilize for maximum yields. Fertility programs based on plant analysis and soil analysis from TPSL will maximize mineral efficiency. 


Seasonal Requirements

Yield Bu/Ac Nitrogen lbs/ac Phosphorous lbs/ac Potassium lbs/ac Magnesium lbs/ac Sulfur lbs/ac
50 270 55 120 25 21
75 405 83 180 38 32
100 540 110 240 50 42
125 675 138 300 63 53
150 810 165 360 75 63
200 1080 220 480 100 84

Note: The above is to be applied in increments according to a schedule!  The timing of the applications is crucial!!! The use of certain adjuvants may significantly reduce some of these requirements. 

A row of green plants growing in a field with a cloudy sky in the background.


Plant Food Utilization


Adequate nodulation can supply a good portion of N. Efficiency of N and P used by the first crop is small, as soybeans are poor feeders – only 10 - 20%. Mixing humus products and Sulfur into the soil weeks before planting may be beneficial. --- K uptake is about 50 - 70%. By supplying the nutritional needs required by your soybeans’ stage of growth, You can dramatically increase your yields and quality, AND Greatly reduce water requirements and eliminate the costs of unnecessary fertilizers!


Soybeans absorb approximately 40 to 45% of their total N, P & K at the beginning of bean formation, when the vegetative plant parts have reached their maximum content. All of these nutrients go into the seed because the grain contains approximately 70% N, 75% P, and 55% K of all the nutrients absorbed.


During the first month of planting, daily nutrient uptakes are small – much less than 1 lb./acre/day. In the second and third month, the daily nutrient requirement can reach 8 lbs. Nitrogen, 0.40 lbs. Phosphorous, and 4 lbs. of Potash.


At soybean yields of 30 to 70 bushels/acre, 1/3 to1/2 (yields above this are proportionately higher) of the Nitrogen absorbed by the plant is in the form of nitrates and ammonium ions. Preplant Nitrogen is recommended depending upon soil analysis results. Phosphate and Potassium should be included with nitrogen soil applications. Since peak Nitrogen uptake corresponds with pod set and seed filling, supplemental Nitrogen is recommended during these stages of growth.


High levels of available Phosphorous are associated with high soybean yields. The greatest demand for Phosphorous is at mid-bloom and mid-pod set. Phosphorous is required for normal Nitrogen fixation. Average mineral recovery from fertilization under good conditions ranges from 10 to 20%. TPSL has been successful in increasing this percentage, especially in drip and pivot irrigation, by using adjuvants such as humic acid, sugars, beneficial soil bacteria and other things.


Soybeans also require large amounts of Potassium. Maximum need is associated with periods of vegetative growth. Potassium can increase the number of nodules which actively fix atmospheric Nitrogen. Average recovery for a Potassium application is 50 to 70%.


The availability of soil nutrients, with the exception of Nitrogen, is basically pH dependent. The pH dictates the complexing, precipitation and solubility of various mineral compounds. Optimal soil pH is between 6.10 to 6.70. If the soil pH is increased from 5.10 to 6.10, soybean yields can increase by 8 bushels/acre.


Very small amounts of Molybdenum (Mo) are required by soybeans for Nitrogen fixation. At pH levels below 6.00, Molybdenum is frequently so unavailable that supplemental applications to seed or foliage will sharply increase yields.


Depending upon your soil’s chemistry, most nutrients can be rapidly “tied-up” into plant-unavailable (insoluble) compounds! It is only the plant-available nutrient compounds – available when the plants need them - that count! Most all other soil tests report at least some amount of those “tied-up / plant-unavailable” compounds, giving you a false sense of adequacy – even as your plants show obvious signs of distress and decline! This hopefully explains why your plants clearly show certain nutrient deficiencies, even though your soil test reports come back showing those nutrients as being adequate or high! All of this can be avoided! 


Under favorable conditions, only 25 to 50 percent of soybean flowers effectively fertilize and set pods. If conditions are not good, most early flowers and pods abort.


Weed control is critical in the production of soybeans. Grasses [weeds] are much better competitors for P, K, Ca and Mg, and will rob the soil of nutrients required for optimal production. In addition, there is good evidence that plants [weeds] volatilize excess Nitrogen through their leaves. Palmers Amaranth, Jimsonweed and Entire leaf Morning-Glory volatilize 5 to 10 times more Nitrogen into the atmosphere, than do soybeans.


In addition, since young soybean leaves volatilize high amounts of Nitrogen, succulent vegetative growth would be associated with higher nitrate loss than slow growth. Hence, high amounts of Nitrogen applied at early stages of growth will be mostly lost.

A drawing of a plant called soybeans dry beans


PLANT SAMPLING 


Sample the most recently matured leaf near the top of the plant. Keep both the petiole and leaf for the sample. 


Approximately 25 to 35 leaves are needed for one sample. 


Repeat sampling every 10 days. Sampling from early growth to pod development.


Only paper, not plastic, bags should be used when sending samples to the lab. Please submit samples along with a Plant Analysis Field Information and Submittal Form which can be obtained from our website.


A complete analysis takes 24 to 48 hours after the sample is received by the lab. TPSL will e-mail your report along with detailed recommendations. 

TPS Lab's Blog

By Joe Pedroza May 5, 2025
Understanding the True Value Behind the Price Tag
By Joe Pedroza April 30, 2025
As summer sets in across much of the country, crops enter one of the most demanding phases of their life cycle. With increased heat, active fruiting, and water stress, nutrient uptake becomes more unpredictable. Even the most well-fertilized soils may fall short in delivering the right nutrients at the right time. That’s where mid-season plant tissue testing becomes an invaluable tool. Why Soil Tests Alone Aren’t Enough Soil tests provide a vital baseline before planting, helping you understand what's available in the root zone. But as the season progresses, multiple factors can interfere with nutrient uptake: Heat stress and limited moisture reduce nutrient movement in soil, making it harder for roots to access nutrients even when they're present. Soil pH shifts —common as microbial activity changes—can lock up nutrients like phosphorus, zinc, or iron, rendering them unavailable to plants. Plant demand changes rapidly during flowering and fruiting, meaning nutrient requirements evolve faster than soil reserves or slow-release fertilizers can respond. A mid-season tissue test reveals what the plant is actually absorbing, not just what’s in the soil. What Tissue Testing Tells You A tissue test provides a real-time snapshot of the plant’s nutritional status. It helps identify: Early signs of nutrient deficiencies , often before symptoms show up visually. This allows for preventative correction, rather than trying to fix a visible problem too late in the season. Imbalances between key nutrients , such as excess nitrogen suppressing calcium uptake, or low magnesium reducing potassium efficiency. Uptake issues caused by stress , poor irrigation practices, or compacted root zones—especially important in summer when evapotranspiration is high and root efficiency is lower. Tissue testing gives you the insight needed to make targeted nutritional corrections , optimizing fruit set, size, and quality. When and How to Tissue Test For most fruiting crops, ideal sampling windows include: Just before flowering , when nutrient demand is about to spike. Early fruit development , to support strong cell division and prevent blossom-end disorders. Mid-season (peak fruit load) , when nutrient draw is at its highest and deficiencies are most likely to develop. Select healthy, recently matured leaves from a representative section of the field. Avoid leaves with obvious damage, disease, or pest activity. Consistency in sampling location and leaf age is critical for accurate comparisons over time. At TPS Lab, we provide detailed sampling instructions and fast turnaround times, so you can act before yield is compromised. Common Summer Deficiencies to Watch For Even in fertilized fields, these nutrients often fall short under summer stress: Potassium (K): Crucial for water regulation, sugar transport, and fruit development. Deficiencies can cause uneven ripening, poor flavor, and lower yields. Calcium (Ca): Required for cell wall strength and fruit quality. Limited uptake often causes blossom end rot in tomatoes and peppers or tip burn in leafy greens. Magnesium (Mg): A central component of chlorophyll. Magnesium deficiency can lead to interveinal yellowing and poor photosynthesis, especially under intense sunlight. Micronutrients (Boron, Manganese, Zinc): These trace elements play vital roles in pollination, enzyme function, and hormone regulation. Even minor deficiencies can lead to poor fruit set or malformed growth. How to Act on Results Once your results are in, use them to tailor your in-season fertility program. Depending on the crop and severity, this might involve: Adjusting fertigation blends to include more soluble potassium or micronutrients based on test results. Applying foliar sprays for immediate correction, especially for mobile nutrients or in cases where soil uptake is impaired. Incorporating amino acid-based fertilizers or biostimulants to enhance nutrient absorption, increase stress tolerance, and promote balanced growth without risking burn or over-fertilization. TPS Lab consultants can help interpret your report and recommend specific products or strategies—whether that includes our own solutions like Nitro P9 or CSL+ , or broader categories suited to your operation. Stay Proactive, Not Reactive By integrating tissue testing into your summer crop management, you shift from guesswork to precision. Avoid late-season surprises, improve fruit quality, and maximize your ROI with simple mid-season monitoring.  Ready to test? Click here to submit a sample or call us at 956-383-0739 to speak with a consultant.
By Joe Pedroza April 17, 2025
And Stop Wasting Money on Products That Don’t Work
Show More